Test Requirement of EN71-14 & GS For Trampoline

EN 71-14 is a European standard that specifies safety requirements and test methods for trampolines used in domestic environments. The GS mark (Geprüfte Sicherheit, meaning “Tested Safety” in German) further assures that products meet German safety requirements. Below is a detailed summary of the requirements applicable to mini, medium, and large trampolines under EN71-14 and GS certifications.

1.Requirements for Mini Trampolines

Mini trampolines, often used indoors or in smaller outdoor spaces, must meet specific safety criteria to prevent slipping and ensure structural stability.

Non-slip Legs

  • Requirement: Legs must be equipped with non-slip features.
  • Testing Method: Compliance shall be verified according to EN 13219:2008 Section 5.2.
  • Purpose: This prevents the trampoline from shifting during use, reducing the risk of injury.

Safety Equipment (Optional)

  • Handrails or Safety Nets:
    • May be included to provide added support or fall protection.
    • Flexibility: Both can be omitted, or only one may be used depending on the design and intended use.
  • Consideration: Although optional, adding these features can enhance the trampoline’s appeal to safety-conscious consumers.

2.Requirements for Medium and Large Trampolines

These trampolines are generally used outdoors and must meet more stringent structural and safety requirements due to their size and higher jumping potential.

A. Non-buried Trampolines

  • Frame Height:
    • For large trampolines, the frame must be ≥ 500 mm above ground level.
  • Safety Features:
    • Must be equipped with an enclosure (i.e., a surrounding net).
    • Handrails are not required for medium or large versions.
  • Purpose: Enclosures help prevent accidental falls off the trampoline surface.

B. Raised Buried Trampolines

  • Installation: Partially installed below ground, but with raised portions above the surface.
  • Safety Features:
    • Must have an enclosure, but no handrails are required.
    • If any component is below ground level, a retaining wall system must be provided to prevent soil collapse or structural instability.
  • Compliance: Ensures the trampoline remains safe and structurally sound when partially buried.

C. Ground-levelled Trampolines

  • Frame Alignment: The frame must be flush with ground level for seamless integration with the landscape.
  • Safety Options:
    • Handrails are not required.
    • Must either:
      • Be equipped with an enclosure, or
      • Be surrounded by a soft impact surface extending 1.0 m from the edge of the jumping area.
  • Standard Reference:
    • The soft surface must comply with EN 1176-1:2017 Section 4.8.2 regarding critical fall height protection (1.5 m).
  • Retaining Wall: A retaining wall system is mandatory to preserve ground structure around the trampoline.

Contact With Us